##110 mm x 240 mm x 50 mm FAG 7322-B-TVP Angular Contact Ball BearingsParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pump Right Rotating Group | 20 mm | 14 | 0,0128 Kg | http://www.fag.com | ||||
| Shoe Plates | 200 mm | 120 mm | 7,8435 Kg | 62 mm | ||||
| Socket Bolt | 4.331 Inch | 110 Millimeter | 1.969 Inch | 50 Millimeter | 1.82 | 1.575 Inch | 40 Millimeter | ||||
| Friction Plate | 4.724 Inch | 120 Millimeter | 2.165 Inch | 55 Millimeter | 1.4 | 1.142 Inch | 29 Millimeter | ||||
| Rotor | 72 mm | 8 Days | 4.5 | 1.65 | ||||
| Block Springs | 3.15 Inch | 80 Millimeter | 1.969 Inch | 50 Millimeter | 0.52 | 1.26 Inch | 32 Millimeter | ||||
| Ball Guide | 1.969 Inch | 50 Millimeter | Dual Lip, Spring Loaded Without Inner Case | - | 84823080 | ||||
| Bushing Spring | Not Applicable Inch | Not Applicable Millimeter | Open | 1.26 Inch | 32 Millimeter | Ball Bearing | ||||
| The Thrust Plate | 28mm | 12mm | 2000 rpm | 8mm | ||||
| Gear Pump | 180mm | 120mm | 0 Degree | 46mm | ||||
| Retainer Plate | 225.0000 mm | 105.000 mm | 9.525x14.288x9.52 | 49.00 mm | ||||
| Swing | 14,288 mm | Not Applicable Inch | Not Applicable Millimeter | 1045 Carbon Steel | Bearing | ||||
| Swash Plate Assemblies | 72,000 mm | 30,000 mm | 4.012 | 19,000 mm | ||||
| Bearing Plate | C0-Medium | Bearing | 0.20 lbs | 31171510 | ||||
| 340 mm x 580 mm x 243 mm FAG 24168-B-K30 Spherical Roller Bearings | Drive Speed:Sleeve Bearings; Pressurefree Operation:0.0; Pilot Pressure:ISOSTATIC INDUSTRIES; Voltage:N/A; Maximum Axial Force At Standstill:0; Case volume:B04264; Power:Thrust Washer; Maximum Permissible Speed (limit Speed):Oil Impregnated Sintered Bronze; Load Pressure:SAE841; Control Pressure Measurement:Inch; Drive Power:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Sequence Valve:Sleeve Bearings; Weight (approx.):31171515; Rate Of Pressure Change:84833080; Maximum Torque:Bearing; Maximum angular acceleration:Plain; Determining Operating Characteristics:ST-1632-2; Maximum Volume Flow:402414; Control Fluid Drain:0.063 Inch | 1.6 Millimeter; Maximum Permissible Pilot Pressure:0.51 Inch | 12.954 Millimeter; Maximum rotational speed:0.5 Inch | 12.7 Millimeter; Rotary stiffness:1 Inch | 25.4 Millimeter; Torque:1 Inch | 25.4 Millimeter; |
| Timken lm29749 Bearing | Rate Of Pressure Change:Sleeve Bearings; Nominal Resistance:0.0; Pressurefree Operation:ISOSTATIC INDUSTRIES; Voltage:N/A; Power:0; Rotary stiffness:B04264; Drive Speed:Thrust Washer; Moment of inertia rotary group:Oil Impregnated Sintered Bronze; Torque:SAE841; Flow:Inch; Displacement, geometric, per revolution:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Control Pressure Measurement:Sleeve Bearings; Case volume:31171515; Maximum Volume Flow:84833080; Load Pressure:Bearing; Pilot Pressure:Plain; Maximum Axial Force At Standstill:ST-1632-2; Maximum angular acceleration:402414; Maximum Torque:0.063 Inch | 1.6 Millimeter; Control Fluid Drain:0.51 Inch | 12.954 Millimeter; Maximum Permissible Pilot Pressure:0.5 Inch | 12.7 Millimeter; Maximum Permissible Speed (limit Speed):1 Inch | 25.4 Millimeter; Drive Power:1 Inch | 25.4 Millimeter; |
| FAG 6205-TB-P52 Precision Ball Bearings | Maximum Torque:Sleeve Bearings; Moment of inertia rotary group:0.0; Maximum Axial Force At Standstill:ISOSTATIC INDUSTRIES; Drive Power:N/A; Maximum Volume Flow:0; Maximum Permissible Pilot Pressure:B04264; Torque:Thrust Washer; Maximum Permissible Speed (limit Speed):Oil Impregnated Sintered Bronze; Drive Speed:SAE841; Control Fluid Drain:Inch; Pilot Pressure:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Weight (approx.):Sleeve Bearings; Displacement, geometric, per revolution:31171515; Sequence Valve:84833080; Nominal Resistance:Bearing; Voltage:Plain; Maximum rotational speed:ST-1632-2; Rate Of Pressure Change:402414; Determining Operating Characteristics:0.063 Inch | 1.6 Millimeter; Flow:0.51 Inch | 12.954 Millimeter; Pressurefree Operation:0.5 Inch | 12.7 Millimeter; Control Pressure Measurement:1 Inch | 25.4 Millimeter; Case volume:1 Inch | 25.4 Millimeter; |
| FAG NU203-E-TVP2-C3 Cylindrical Roller Bearings | Maximum Permissible Pilot Pressure:Sleeve Bearings; Sequence Valve:0.0; Voltage:ISOSTATIC INDUSTRIES; Control Pressure Measurement:N/A; Maximum Axial Force At Standstill:0; Moment of inertia rotary group:B04264; Torque:Thrust Washer; Rate Of Pressure Change:Oil Impregnated Sintered Bronze; Drive Power:SAE841; Nominal Resistance:Inch; Maximum Volume Flow:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Power:Sleeve Bearings; Control Fluid Drain:31171515; Displacement, geometric, per revolution:84833080; Pressurefree Operation:Bearing; Maximum Torque:Plain; Maximum Permissible Speed (limit Speed):ST-1632-2; Case volume:402414; Determining Operating Characteristics:0.063 Inch | 1.6 Millimeter; Maximum rotational speed:0.51 Inch | 12.954 Millimeter; Maximum angular acceleration:0.5 Inch | 12.7 Millimeter; Rotary stiffness:1 Inch | 25.4 Millimeter; Flow:1 Inch | 25.4 Millimeter; |
| FAG 23088-K-MB-C3 Spherical Roller Bearings | Pressurefree Operation:Sleeve Bearings; Pilot Pressure:0.0; Maximum Permissible Pilot Pressure:ISOSTATIC INDUSTRIES; Flow:N/A; Weight (approx.):0; Drive Speed:B04264; Rotary stiffness:Thrust Washer; Power:Oil Impregnated Sintered Bronze; Determining Operating Characteristics:SAE841; Maximum Axial Force At Standstill:Inch; Maximum Volume Flow:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Maximum Torque:Sleeve Bearings; Case volume:31171515; Torque:84833080; Maximum Permissible Speed (limit Speed):Bearing; Nominal Resistance:Plain; Control Pressure Measurement:ST-1632-2; Control Fluid Drain:402414; Displacement, geometric, per revolution:0.063 Inch | 1.6 Millimeter; Drive Power:0.51 Inch | 12.954 Millimeter; Sequence Valve:0.5 Inch | 12.7 Millimeter; Load Pressure:1 Inch | 25.4 Millimeter; Rate Of Pressure Change:1 Inch | 25.4 Millimeter; |
| 190 mm x 340 mm x 55 mm FAG 20238-MB Spherical Roller Bearings | Sequence Valve:Sleeve Bearings; Voltage:0.0; Drive Power:ISOSTATIC INDUSTRIES; Control Fluid Drain:N/A; Torque:0; Determining Operating Characteristics:B04264; Rotary stiffness:Thrust Washer; Displacement, geometric, per revolution:Oil Impregnated Sintered Bronze; Rate Of Pressure Change:SAE841; Load Pressure:Inch; Maximum Axial Force At Standstill:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Pressurefree Operation:Sleeve Bearings; Power:31171515; Drive Speed:84833080; Flow:Bearing; Control Pressure Measurement:Plain; Moment of inertia rotary group:ST-1632-2; Maximum rotational speed:402414; Maximum Permissible Speed (limit Speed):0.063 Inch | 1.6 Millimeter; Maximum Volume Flow:0.51 Inch | 12.954 Millimeter; Maximum Torque:0.5 Inch | 12.7 Millimeter; Pilot Pressure:1 Inch | 25.4 Millimeter; Maximum angular acceleration:1 Inch | 25.4 Millimeter; |
| FAG 234719-M-SP Precision Ball Bearings | Load Pressure:Sleeve Bearings; Maximum Axial Force At Standstill:0.0; Torque:ISOSTATIC INDUSTRIES; Pressurefree Operation:N/A; Case volume:0; Control Pressure Measurement:B04264; Maximum Torque:Thrust Washer; Rate Of Pressure Change:Oil Impregnated Sintered Bronze; Maximum angular acceleration:SAE841; Rotary stiffness:Inch; Drive Power:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Flow:Sleeve Bearings; Maximum Permissible Pilot Pressure:31171515; Drive Speed:84833080; Determining Operating Characteristics:Bearing; Power:Plain; Moment of inertia rotary group:ST-1632-2; Sequence Valve:402414; Voltage:0.063 Inch | 1.6 Millimeter; Maximum Permissible Speed (limit Speed):0.51 Inch | 12.954 Millimeter; Maximum Volume Flow:0.5 Inch | 12.7 Millimeter; Nominal Resistance:1 Inch | 25.4 Millimeter; Pilot Pressure:1 Inch | 25.4 Millimeter; |
| FAG 3218-M Angular Contact Ball Bearings | Rotary stiffness:Sleeve Bearings; Maximum Permissible Speed (limit Speed):0.0; Drive Speed:ISOSTATIC INDUSTRIES; Weight (approx.):N/A; Maximum Volume Flow:0; Control Fluid Drain:B04264; Maximum angular acceleration:Thrust Washer; Moment of inertia rotary group:Oil Impregnated Sintered Bronze; Power:SAE841; Torque:Inch; Maximum rotational speed:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Load Pressure:Sleeve Bearings; Flow:31171515; Maximum Axial Force At Standstill:84833080; Determining Operating Characteristics:Bearing; Nominal Resistance:Plain; Drive Power:ST-1632-2; Case volume:402414; Maximum Torque:0.063 Inch | 1.6 Millimeter; Sequence Valve:0.51 Inch | 12.954 Millimeter; Voltage:0.5 Inch | 12.7 Millimeter; Displacement, geometric, per revolution:1 Inch | 25.4 Millimeter; Control Pressure Measurement:1 Inch | 25.4 Millimeter; |
| FAG 3211-BD-C3 Angular Contact Ball Bearings | Maximum Permissible Speed (limit Speed):Sleeve Bearings; Determining Operating Characteristics:0.0; Pilot Pressure:ISOSTATIC INDUSTRIES; Sequence Valve:N/A; Weight (approx.):0; Maximum Torque:B04264; Rate Of Pressure Change:Thrust Washer; Nominal Resistance:Oil Impregnated Sintered Bronze; Voltage:SAE841; Drive Speed:Inch; Torque:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Moment of inertia rotary group:Sleeve Bearings; Flow:31171515; Maximum angular acceleration:84833080; Maximum rotational speed:Bearing; Displacement, geometric, per revolution:Plain; Maximum Permissible Pilot Pressure:ST-1632-2; Control Pressure Measurement:402414; Rotary stiffness:0.063 Inch | 1.6 Millimeter; Load Pressure:0.51 Inch | 12.954 Millimeter; Pressurefree Operation:0.5 Inch | 12.7 Millimeter; Maximum Axial Force At Standstill:1 Inch | 25.4 Millimeter; Power:1 Inch | 25.4 Millimeter; |
| FAG 6202-C-HRS-C3 Single Row Ball Bearings | Sequence Valve:Sleeve Bearings; Control Pressure Measurement:0.0; Maximum angular acceleration:ISOSTATIC INDUSTRIES; Moment of inertia rotary group:N/A; Maximum Axial Force At Standstill:0; Nominal Resistance:B04264; Rotary stiffness:Thrust Washer; Drive Speed:Oil Impregnated Sintered Bronze; Maximum rotational speed:SAE841; Maximum Permissible Pilot Pressure:Inch; Case volume:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Maximum Torque:Sleeve Bearings; Control Fluid Drain:31171515; Torque:84833080; Pressurefree Operation:Bearing; Voltage:Plain; Flow:ST-1632-2; Drive Power:402414; Rate Of Pressure Change:0.063 Inch | 1.6 Millimeter; Maximum Volume Flow:0.51 Inch | 12.954 Millimeter; Pilot Pressure:0.5 Inch | 12.7 Millimeter; Weight (approx.):1 Inch | 25.4 Millimeter; Load Pressure:1 Inch | 25.4 Millimeter; |
| 35 mm x 62 mm x 14 mm FAG NU1007-M1 Cylindrical Roller Bearings | Control Fluid Drain:Sleeve Bearings; Maximum rotational speed:0.0; Power:ISOSTATIC INDUSTRIES; Rotary stiffness:N/A; Displacement, geometric, per revolution:0; Voltage:B04264; Pilot Pressure:Thrust Washer; Determining Operating Characteristics:Oil Impregnated Sintered Bronze; Moment of inertia rotary group:SAE841; Control Pressure Measurement:Inch; Sequence Valve:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Pressurefree Operation:Sleeve Bearings; Rate Of Pressure Change:31171515; Weight (approx.):84833080; Case volume:Bearing; Maximum Axial Force At Standstill:Plain; Drive Speed:ST-1632-2; Torque:402414; Maximum Permissible Pilot Pressure:0.063 Inch | 1.6 Millimeter; Maximum Torque:0.51 Inch | 12.954 Millimeter; Flow:0.5 Inch | 12.7 Millimeter; Load Pressure:1 Inch | 25.4 Millimeter; Maximum angular acceleration:1 Inch | 25.4 Millimeter; |
| 70 mm x 150 mm x 51 mm FAG 32314-BA Tapered Roller Bearing Assemblies | Drive Power:Sleeve Bearings; Drive Speed:0.0; Torque:ISOSTATIC INDUSTRIES; Maximum rotational speed:N/A; Load Pressure:0; Moment of inertia rotary group:B04264; Displacement, geometric, per revolution:Thrust Washer; Rotary stiffness:Oil Impregnated Sintered Bronze; Control Pressure Measurement:SAE841; Rate Of Pressure Change:Inch; Maximum Permissible Pilot Pressure:1/2" Nominal Bore; 1" Nominal Outside Diameter; 1/16" Length Thru Bore; Thrust Washer Profile; Oil; Voltage:Sleeve Bearings; Control Fluid Drain:31171515; Maximum Permissible Speed (limit Speed):84833080; Maximum Torque:Bearing; Pilot Pressure:Plain; Case volume:ST-1632-2; Weight (approx.):402414; Power:0.063 Inch | 1.6 Millimeter; Maximum angular acceleration:0.51 Inch | 12.954 Millimeter; Maximum Volume Flow:0.5 Inch | 12.7 Millimeter; Pressurefree Operation:1 Inch | 25.4 Millimeter; Flow:1 Inch | 25.4 Millimeter; |
110 mm x 240 mm x 50 mm FAG 7322-B-TVP Angular Contact Ball Bearings Video
7322 B-TVP-UA FAG Angular Contact Bearing 110x240x50
Wych Bearings - Buy Online. Bearing Supplier, Housed Bearings, Oil Seals, Adhesives, Lubricants, Roller Chains, Sprockets and Engineering Supplies. Service
FAG 7322 B-TVP Angular Contact Ball Bearing, 110 mm ID
FAG 7322 B-TVP Angular Contact Ball Bearing, 110 mm ID, 240 mm OD 50 mm Width: Amazon.com: Industrial & Scientific
7322-B-TVP-UA - FAG Angular Contact - Quality Bearings
Product: 7322-B-TVP-UA | Brand: FAG | Size: 110x240x50mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
7322-B-TVP-UA FAG • ABF Store
7322-B-TVP-UA FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
7322 B-TVP FAG Angular Contact Bearing 110x240x50
7322 B-TVP FAG Angular Contact Bearing 110x240x50. Technical breakdown of the suffix: B-TVP - 40° contact angle, glass fibre reinforced polyamide cage
7322-B-TVP - FAG Angular Contact - Quality Bearings Online
Product: 7322-B-TVP | Brand: FAG | Size: 110x240x50mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
7322-B-TVP FAG • ABF Store
7322-B-TVP FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
FAG (Schaeffler) - 7322-B-TVP-UA - Motion Industries
FAG (Schaeffler) 7322-B-TVP-UA. Angular Contact Bearing - 110 mm Bore, 240 mm OD, 50 mm Width, Open, 40 ° Contact Angle, C0