##TIMKEN 61905 Single Row Ball BearingsParts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Variable Piston | 0,04 Kg | 22 mm | 12 | 3/4 in | ||||
| Bushing Spring | 0,95 Kg | 130 mm | 85 mm | 12 mm | ||||
| Snap Ring | 3.55 kg | 0.07 lbs | 50.8 mm | 1 Piece Solid | ||||
| Central Shaft | 1.151 | 7.125 Inch | 180.975 Millimeter | 0 Inch | 0 Millimeter | N/A | ||||
| Press Pin | 0.635 | 4.921 Inch | 125 Millimeter | 3.543 Inch | 90 Millimeter | N/A | ||||
| Valve Plates | 3.178 | 1.75 Inch | 44.45 Millimeter | 2 Inch | 50.8 Millimeter | N/A | ||||
| Saddle Bearing | 2.315 | Cup | Cup | N/A | ||||
| Rotor | 2.01 | Brass | 2 Inch | 50.8 Millimeter | N/A | ||||
| Retainer Plate | 1.02 | 3.937 Inch | 100 Millimeter | 1.772 Inch | 45 Millimeter | N/A | ||||
| Inclined Plate | - | 100 mm | 31171511 | N/A | ||||
| Shoe Plates | SAE 841 Bronze | 1-7/16 in | 3/4 in | 47 | ||||
| Pressure Plate | 31171531 | 4.4375 in | 99 mm | 12 mm | ||||
| Piston Sets | 4.760 Kilogram | 22.65 mm | Phenolic | 2.7500 in | ||||
| Drive Shaft | 0.07 lbs | 31171531 | Ball Bearing | SCC211 | ||||
| TIMKEN LSE112BXHDFATL Flange Block Bearings | Flow:1300; Nominal Resistance:1351; Weight (approx.):1328; Control Pressure Measurement:Imperial; Rotary stiffness:0.20 Kg; Maximum angular acceleration:Stamped Steel; Drive Speed:19.050 mm; Maximum Permissible Pilot Pressure:52.388 mm; Maximum Axial Force At Standstill:23.978 mm; Sequence Valve:14.288 mm; Maximum Torque:23.180 mm; Rate Of Pressure Change:2.790 mm; Displacement, geometric, per revolution:1.52 mm; Moment of inertia rotary group:24.89 mm; Determining Operating Characteristics:29.46 mm; Drive Power:49.00 mm; Load Pressure:44.96 mm; Torque:1.8 mm; Pressurefree Operation:4.6 mm; Maximum rotational speed:-11.4 mm; Maximum Volume Flow:2790 lbf; Maximum Permissible Speed (limit Speed):10800 lbf; Case volume:10900 lbf; Pilot Pressure:1390 lbf; Voltage:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| TIMKEN M255449D-902D5 Tapered Roller Bearing Assemblies | Control Fluid Drain:1300; Power:1351; Rotary stiffness:1328; Nominal Resistance:Imperial; Sequence Valve:0.20 Kg; Maximum Permissible Pilot Pressure:Stamped Steel; Determining Operating Characteristics:19.050 mm; Moment of inertia rotary group:52.388 mm; Maximum Permissible Speed (limit Speed):23.978 mm; Pilot Pressure:14.288 mm; Drive Power:23.180 mm; Pressurefree Operation:2.790 mm; Torque:1.52 mm; Displacement, geometric, per revolution:24.89 mm; Case volume:29.46 mm; Maximum Axial Force At Standstill:49.00 mm; Maximum rotational speed:44.96 mm; Load Pressure:1.8 mm; Flow:4.6 mm; Maximum angular acceleration:-11.4 mm; Control Pressure Measurement:2790 lbf; Maximum Volume Flow:10800 lbf; Rate Of Pressure Change:10900 lbf; Drive Speed:1390 lbf; Maximum Torque:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| TIMKEN Feb-93 Tapered Roller Bearings | Control Pressure Measurement:1300; Pressurefree Operation:1351; Voltage:1328; Displacement, geometric, per revolution:Imperial; Moment of inertia rotary group:0.20 Kg; Maximum rotational speed:Stamped Steel; Torque:19.050 mm; Case volume:52.388 mm; Maximum angular acceleration:23.978 mm; Control Fluid Drain:14.288 mm; Drive Speed:23.180 mm; Maximum Volume Flow:2.790 mm; Maximum Axial Force At Standstill:1.52 mm; Load Pressure:24.89 mm; Flow:29.46 mm; Pilot Pressure:49.00 mm; Maximum Torque:44.96 mm; Nominal Resistance:1.8 mm; Drive Power:4.6 mm; Weight (approx.):-11.4 mm; Determining Operating Characteristics:2790 lbf; Rate Of Pressure Change:10800 lbf; Rotary stiffness:10900 lbf; Power:1390 lbf; Sequence Valve:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| TIMKEN 32213 90KA1 Tapered Roller Bearing Assemblies | Pressurefree Operation:1300; Weight (approx.):1351; Sequence Valve:1328; Voltage:Imperial; Case volume:0.20 Kg; Pilot Pressure:Stamped Steel; Drive Power:19.050 mm; Control Pressure Measurement:52.388 mm; Nominal Resistance:23.978 mm; Torque:14.288 mm; Maximum Torque:23.180 mm; Maximum Permissible Pilot Pressure:2.790 mm; Moment of inertia rotary group:1.52 mm; Control Fluid Drain:24.89 mm; Power:29.46 mm; Load Pressure:49.00 mm; Rotary stiffness:44.96 mm; Maximum rotational speed:1.8 mm; Maximum angular acceleration:4.6 mm; Determining Operating Characteristics:-11.4 mm; Rate Of Pressure Change:2790 lbf; Maximum Volume Flow:10800 lbf; Flow:10900 lbf; Displacement, geometric, per revolution:1390 lbf; Maximum Axial Force At Standstill:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 17 Inch | 431.8 Millimeter x 0 Inch | 0 Millimeter x 2 Inch | 50.8 Millimeter TIMKEN L269143-2 Tapered Roller Bearings | Maximum Torque:1300; Maximum angular acceleration:1351; Case volume:1328; Torque:Imperial; Drive Speed:0.20 Kg; Drive Power:Stamped Steel; Rotary stiffness:19.050 mm; Pressurefree Operation:52.388 mm; Voltage:23.978 mm; Maximum rotational speed:14.288 mm; Maximum Axial Force At Standstill:23.180 mm; Maximum Permissible Pilot Pressure:2.790 mm; Maximum Volume Flow:1.52 mm; Control Fluid Drain:24.89 mm; Rate Of Pressure Change:29.46 mm; Displacement, geometric, per revolution:49.00 mm; Control Pressure Measurement:44.96 mm; Power:1.8 mm; Nominal Resistance:4.6 mm; Weight (approx.):-11.4 mm; Flow:2790 lbf; Load Pressure:10800 lbf; Pilot Pressure:10900 lbf; Sequence Valve:1390 lbf; Maximum Permissible Speed (limit Speed):2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| TIMKEN 3MMC200WI QUM Miniature Precision Ball Bearings | Rate Of Pressure Change:1300; Sequence Valve:1351; Maximum rotational speed:1328; Control Pressure Measurement:Imperial; Displacement, geometric, per revolution:0.20 Kg; Maximum Volume Flow:Stamped Steel; Flow:19.050 mm; Determining Operating Characteristics:52.388 mm; Voltage:23.978 mm; Rotary stiffness:14.288 mm; Drive Speed:23.180 mm; Torque:2.790 mm; Maximum Permissible Pilot Pressure:1.52 mm; Nominal Resistance:24.89 mm; Weight (approx.):29.46 mm; Power:49.00 mm; Pilot Pressure:44.96 mm; Case volume:1.8 mm; Control Fluid Drain:4.6 mm; Maximum Axial Force At Standstill:-11.4 mm; Maximum Permissible Speed (limit Speed):2790 lbf; Maximum angular acceleration:10800 lbf; Moment of inertia rotary group:10900 lbf; Drive Power:1390 lbf; Maximum Torque:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 0.669 Inch | 17 Millimeter x 1.575 Inch | 40 Millimeter x 0.472 Inch | 12 Millimeter TIMKEN 2MMV203WICRUL Precision Ball Bearings | Rotary stiffness:1300; Maximum Volume Flow:1351; Weight (approx.):1328; Flow:Imperial; Load Pressure:0.20 Kg; Control Fluid Drain:Stamped Steel; Rate Of Pressure Change:19.050 mm; Power:52.388 mm; Maximum Permissible Speed (limit Speed):23.978 mm; Maximum angular acceleration:14.288 mm; Maximum Axial Force At Standstill:23.180 mm; Drive Speed:2.790 mm; Moment of inertia rotary group:1.52 mm; Nominal Resistance:24.89 mm; Pilot Pressure:29.46 mm; Maximum Torque:49.00 mm; Determining Operating Characteristics:44.96 mm; Sequence Valve:1.8 mm; Displacement, geometric, per revolution:4.6 mm; Maximum rotational speed:-11.4 mm; Pressurefree Operation:2790 lbf; Maximum Permissible Pilot Pressure:10800 lbf; Torque:10900 lbf; Case volume:1390 lbf; Drive Power:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 1.75 Inch | 44.45 Millimeter x 0 Inch | 0 Millimeter x 1.625 Inch | 41.275 Millimeter TIMKEN 615-3 Tapered Roller Bearings | Maximum rotational speed:1300; Moment of inertia rotary group:1351; Control Fluid Drain:1328; Maximum Volume Flow:Imperial; Determining Operating Characteristics:0.20 Kg; Voltage:Stamped Steel; Maximum angular acceleration:19.050 mm; Power:52.388 mm; Maximum Axial Force At Standstill:23.978 mm; Sequence Valve:14.288 mm; Maximum Permissible Speed (limit Speed):23.180 mm; Torque:2.790 mm; Pilot Pressure:1.52 mm; Maximum Permissible Pilot Pressure:24.89 mm; Drive Power:29.46 mm; Drive Speed:49.00 mm; Control Pressure Measurement:44.96 mm; Displacement, geometric, per revolution:1.8 mm; Rate Of Pressure Change:4.6 mm; Weight (approx.):-11.4 mm; Load Pressure:2790 lbf; Pressurefree Operation:10800 lbf; Case volume:10900 lbf; Nominal Resistance:1390 lbf; Rotary stiffness:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 2.559 Inch | 64.999 Millimeter x 0 Inch | 0 Millimeter x 1 Inch | 25.4 Millimeter TIMKEN 29588-3 Tapered Roller Bearings | Rate Of Pressure Change:1300; Maximum Volume Flow:1351; Voltage:1328; Weight (approx.):Imperial; Nominal Resistance:0.20 Kg; Maximum rotational speed:Stamped Steel; Torque:19.050 mm; Control Fluid Drain:52.388 mm; Sequence Valve:23.978 mm; Power:14.288 mm; Case volume:23.180 mm; Control Pressure Measurement:2.790 mm; Flow:1.52 mm; Pressurefree Operation:24.89 mm; Maximum Permissible Speed (limit Speed):29.46 mm; Determining Operating Characteristics:49.00 mm; Moment of inertia rotary group:44.96 mm; Maximum Axial Force At Standstill:1.8 mm; Rotary stiffness:4.6 mm; Pilot Pressure:-11.4 mm; Maximum Torque:2790 lbf; Load Pressure:10800 lbf; Drive Power:10900 lbf; Displacement, geometric, per revolution:1390 lbf; Drive Speed:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 0.591 Inch | 15 Millimeter x 1.102 Inch | 28 Millimeter x 0.827 Inch | 21 Millimeter TIMKEN 2MM9302WI TUL Precision Ball Bearings | Maximum Axial Force At Standstill:1300; Moment of inertia rotary group:1351; Power:1328; Control Fluid Drain:Imperial; Maximum Permissible Speed (limit Speed):0.20 Kg; Control Pressure Measurement:Stamped Steel; Maximum angular acceleration:19.050 mm; Flow:52.388 mm; Torque:23.978 mm; Pressurefree Operation:14.288 mm; Maximum Volume Flow:23.180 mm; Maximum rotational speed:2.790 mm; Rate Of Pressure Change:1.52 mm; Nominal Resistance:24.89 mm; Case volume:29.46 mm; Drive Power:49.00 mm; Determining Operating Characteristics:44.96 mm; Maximum Permissible Pilot Pressure:1.8 mm; Load Pressure:4.6 mm; Displacement, geometric, per revolution:-11.4 mm; Rotary stiffness:2790 lbf; Voltage:10800 lbf; Sequence Valve:10900 lbf; Pilot Pressure:1390 lbf; Weight (approx.):2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 3.937 Inch | 100 Millimeter x 5.906 Inch | 150 Millimeter x 2.835 Inch | 72 Millimeter TIMKEN 2MM9120WI TUL Precision Ball Bearings | Maximum Permissible Pilot Pressure:1300; Maximum rotational speed:1351; Maximum angular acceleration:1328; Pilot Pressure:Imperial; Sequence Valve:0.20 Kg; Maximum Permissible Speed (limit Speed):Stamped Steel; Displacement, geometric, per revolution:19.050 mm; Nominal Resistance:52.388 mm; Maximum Axial Force At Standstill:23.978 mm; Flow:14.288 mm; Load Pressure:23.180 mm; Moment of inertia rotary group:2.790 mm; Power:1.52 mm; Rate Of Pressure Change:24.89 mm; Voltage:29.46 mm; Pressurefree Operation:49.00 mm; Weight (approx.):44.96 mm; Rotary stiffness:1.8 mm; Control Fluid Drain:4.6 mm; Case volume:-11.4 mm; Drive Power:2790 lbf; Torque:10800 lbf; Control Pressure Measurement:10900 lbf; Drive Speed:1390 lbf; Maximum Volume Flow:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
| 1.5 Inch | 38.1 Millimeter x 0 Inch | 0 Millimeter x 1.455 Inch | 36.957 Millimeter TIMKEN 542-2 Tapered Roller Bearings | Control Fluid Drain:1300; Maximum Axial Force At Standstill:1351; Nominal Resistance:1328; Rate Of Pressure Change:Imperial; Pilot Pressure:0.20 Kg; Maximum Torque:Stamped Steel; Displacement, geometric, per revolution:19.050 mm; Rotary stiffness:52.388 mm; Weight (approx.):23.978 mm; Flow:14.288 mm; Pressurefree Operation:23.180 mm; Maximum rotational speed:2.790 mm; Control Pressure Measurement:1.52 mm; Torque:24.89 mm; Moment of inertia rotary group:29.46 mm; Power:49.00 mm; Case volume:44.96 mm; Drive Power:1.8 mm; Maximum angular acceleration:4.6 mm; Load Pressure:-11.4 mm; Maximum Volume Flow:2790 lbf; Maximum Permissible Pilot Pressure:10800 lbf; Determining Operating Characteristics:10900 lbf; Maximum Permissible Speed (limit Speed):1390 lbf; Sequence Valve:2; e - ISO Factor8:0.29; Y - ISO Factor9:2.05; G1 - Heat Generation Factor (Roller-Raceway):10.3; G2 - Heat Generation Factor (Rib-Roller End):5.2; Cg - Geometry Factor:0.0508; |
TIMKEN 61905 Deep Groove Ball Bearings | 25x42x9mm
TIMKEN 61905 bearing, Deep groove ball bearings, Dimensions:25mm x 42mm x 9mm, Dynamic Load Rating: 7kN, Static Load Rating: 4.6kN
TIMKEN Ball Bearing 6905/ 61905 2RS 25mm x 42mm x 9mm
TIMKEN Ball Bearing 6905/ 61905 2RS 25mm x 42mm x 9mm. Stock Code: 61905 2RS. £8.96 (inc VAT) Each £7.47 (exc VAT) Each (1 units per Each)
Timken - 61905-2RS - Motion Industries
Timken 61905-2RS. Radial/Deep Groove Ball Bearing - Round Bore, 25 mm ID, 42 mm OD, 9 mm Width, Two Contact Seals, Internal Clearance
Timken - 61905 - Motion Industries
Buy Timken Radial & Deep Groove Ball Bearings 61905 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
61905 2RS 25mm Bore x 42mmOD x 9.0mmW Thin Section
Bore Size, 25mm. Dynamic Load Bearing, 1590 lb. Enclosure Type, Double Rubber Sealed. Material, Steel. Number of Rows, 1. Outer Diameter, 42mm
Timken Co. | 61905-2RS | Ball Bearing | Applied
Shop Timken Co. 61905-2RS at Applied.com, which includes; Ball Bearing, 25 mm Inside Diameter, 42 mm Outside Diameter, 9 mm Width, Two Contact Seals
61905 - Timken Thin Section - Quality Bearings Online
Product: 61905 | Brand: Timken | Size: 25x42x9mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
61905-2RS - Timken CAD
Browse Part Number 61905-2RS, Thin Section Ball Bearings (61700, 61800, 61900) in the The Timken Company catalog including Part Number,Item Name
TIMKEN 61905 Single Row Ball Bearings Video