##3 Inch | 76.2 Millimeter x 7 Inch | 177.8 Millimeter x 1.563 Inch | 39.7 Millimeter CONSOLIDATED BEARING MS-19-AC Angular Contact Ball BearingsParts Table 1## |
|---|
| Skeleton Oil Seal | 59,131 mm | 31.75 mm | Tapered Adapter Sleeve | 0.29 |
| Block Cylinder | 100 mm | 65 mm | 0,435 Kg | N/A |
| Swash Plate | 125 mm | 90 mm | 6,35 mm | Bushing With Flange |
| Housings Casings | 7.875 Inch | 200.03 Millimeter | 4.938 Inch | 125.425 Millimeter | 77.634 | N/A |
| Push Rod | 2.319 Inch | 58.9 Millimeter | 1.969 Inch | 50 Millimeter | 4.994 | N/A |
| Bearings | 0.502 Inch | 12.751 Millimeter | 0.377 Inch | 9.576 Millimeter | 0.006 | N/A |
| Retainer Plate | 2.165 Inch | 55 Millimeter | 1.181 Inch | 30 Millimeter | 0.23 | N/A |
| Set Plate | 1.26 Inch | 32 Millimeter | 0.472 Inch | 12 Millimeter | - | N/A |
| Cylinder Block | Special | 8483.30.80.00 | - | N/A |
| Rotor | Non-Contact Seal | 90x125x18 | 0.455 | N/A |
| Coil Spring | 13mm | 4mm | 30MM Bore; 55MM Outside Diameter; 26MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 2 (1 Pair) Bearings; 25 Degree Contact Angle; Polyamide Cage Material; 1 Rib Outer Ring Ra | Bushing With Flange |
| Piston Shoe | 150 mm | 85 mm | 15,875 mm | Nitrile |
| Ball Guide | 15,875 mm | 6,35 mm | 0.3 mm | 125 |
| Saddle Bearing | 5415U | 1/4" Bore; 5/8" Outside Diameter; 0.196" Outer Race Width; 2 Metal Shields; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C0-Medium Interna | 0.43 lbs | Oil Impregnated Sintered Bronze |
| CONSOLIDATED BEARING 87026 Single Row Ball Bearings | Case volume:14 mm; Sequence Valve:10 N/mm2; Maximum Torque:16 mm; Maximum Volume Flow:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Load Pressure:10 mm; Rate Of Pressure Change:300 Cast Iron; Voltage:Plain Sleeve; Control Pressure Measurement:RoHS; Pilot Pressure:Oil-Impregnated Expanded Cast Iron; Moment of inertia rotary group:30B; Control Fluid Drain:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Pressurefree Operation:Lead Free; Drive Speed:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| CONSOLIDATED BEARING T-742 Thrust Roller Bearing | Maximum Torque:14 mm; Maximum Permissible Pilot Pressure:10 N/mm2; Maximum Volume Flow:16 mm; Load Pressure:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Power:10 mm; Drive Speed:300 Cast Iron; Drive Power:Plain Sleeve; Displacement, geometric, per revolution:RoHS; Control Fluid Drain:Oil-Impregnated Expanded Cast Iron; Pilot Pressure:30B; Weight (approx.):Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Maximum rotational speed:Lead Free; Maximum angular acceleration:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| CONSOLIDATED BEARING FT-39 Thrust Ball Bearing | Rotary stiffness:14 mm; Drive Power:10 N/mm2; Nominal Resistance:16 mm; Maximum Permissible Speed (limit Speed):Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Control Fluid Drain:10 mm; Maximum angular acceleration:300 Cast Iron; Control Pressure Measurement:Plain Sleeve; Maximum Torque:RoHS; Load Pressure:Oil-Impregnated Expanded Cast Iron; Pressurefree Operation:30B; Determining Operating Characteristics:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Displacement, geometric, per revolution:Lead Free; Drive Speed:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 1.25 Inch | 31.75 Millimeter x 2 Inch | 50.8 Millimeter x 3 Inch | 76.2 Millimeter CONSOLIDATED BEARING 96748 Cylindrical Roller Bearings | Pressurefree Operation:14 mm; Sequence Valve:10 N/mm2; Torque:16 mm; Control Pressure Measurement:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Load Pressure:10 mm; Maximum rotational speed:300 Cast Iron; Maximum Volume Flow:Plain Sleeve; Case volume:RoHS; Drive Power:Oil-Impregnated Expanded Cast Iron; Determining Operating Characteristics:30B; Control Fluid Drain:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Displacement, geometric, per revolution:Lead Free; Maximum Axial Force At Standstill:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 0.866 Inch | 22 Millimeter CONSOLIDATED BEARING 6212-2RS P/6 C/3 Precision Ball Bearings | Case volume:14 mm; Maximum angular acceleration:10 N/mm2; Sequence Valve:16 mm; Rate Of Pressure Change:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Determining Operating Characteristics:10 mm; Pressurefree Operation:300 Cast Iron; Drive Power:Plain Sleeve; Load Pressure:RoHS; Control Pressure Measurement:Oil-Impregnated Expanded Cast Iron; Displacement, geometric, per revolution:30B; Maximum Permissible Speed (limit Speed):Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Maximum Torque:Lead Free; Rotary stiffness:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| CONSOLIDATED BEARING 6200-ZZN Single Row Ball Bearings | Torque:14 mm; Voltage:10 N/mm2; Control Pressure Measurement:16 mm; Drive Power:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Weight (approx.):10 mm; Control Fluid Drain:300 Cast Iron; Flow:Plain Sleeve; Displacement, geometric, per revolution:RoHS; Rate Of Pressure Change:Oil-Impregnated Expanded Cast Iron; Maximum Volume Flow:30B; Maximum Torque:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Sequence Valve:Lead Free; Maximum rotational speed:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 3.346 Inch | 85 Millimeter x 5.906 Inch | 150 Millimeter x 1.937 Inch | 49.2 Millimeter CONSOLIDATED BEARING 5217 M C/3 Angular Contact Ball Bearings | Control Pressure Measurement:14 mm; Control Fluid Drain:10 N/mm2; Maximum Volume Flow:16 mm; Torque:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Maximum Axial Force At Standstill:10 mm; Case volume:300 Cast Iron; Determining Operating Characteristics:Plain Sleeve; Sequence Valve:RoHS; Flow:Oil-Impregnated Expanded Cast Iron; Drive Speed:30B; Pilot Pressure:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Power:Lead Free; Displacement, geometric, per revolution:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 2.362 Inch | 60 Millimeter x 3.74 Inch | 95 Millimeter x 0.709 Inch | 18 Millimeter CONSOLIDATED BEARING 7012 TG P/4 Precision Ball Bearings | Pilot Pressure:14 mm; Drive Power:10 N/mm2; Voltage:16 mm; Power:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Maximum Permissible Pilot Pressure:10 mm; Drive Speed:300 Cast Iron; Rate Of Pressure Change:Plain Sleeve; Load Pressure:RoHS; Maximum angular acceleration:Oil-Impregnated Expanded Cast Iron; Weight (approx.):30B; Rotary stiffness:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Control Pressure Measurement:Lead Free; Flow:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 0.945 Inch | 24 Millimeter x 1.26 Inch | 32 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING NK-24/20 Needle Non Thrust Roller Bearings | Rotary stiffness:14 mm; Pilot Pressure:10 N/mm2; Drive Speed:16 mm; Displacement, geometric, per revolution:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Determining Operating Characteristics:10 mm; Maximum Axial Force At Standstill:300 Cast Iron; Moment of inertia rotary group:Plain Sleeve; Maximum Permissible Pilot Pressure:RoHS; Power:Oil-Impregnated Expanded Cast Iron; Voltage:30B; Maximum Torque:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Maximum angular acceleration:Lead Free; Nominal Resistance:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.417 Inch | 36 Millimeter CONSOLIDATED BEARING NUP-2309 Cylindrical Roller Bearings | Weight (approx.):14 mm; Rotary stiffness:10 N/mm2; Maximum Torque:16 mm; Nominal Resistance:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Maximum angular acceleration:10 mm; Maximum Axial Force At Standstill:300 Cast Iron; Determining Operating Characteristics:Plain Sleeve; Control Pressure Measurement:RoHS; Maximum Volume Flow:Oil-Impregnated Expanded Cast Iron; Drive Power:30B; Sequence Valve:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Maximum rotational speed:Lead Free; Moment of inertia rotary group:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter CONSOLIDATED BEARING 5206 NR P/6 C/3 Precision Ball Bearings | Flow:14 mm; Moment of inertia rotary group:10 N/mm2; Torque:16 mm; Maximum Permissible Speed (limit Speed):Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Voltage:10 mm; Control Fluid Drain:300 Cast Iron; Power:Plain Sleeve; Rate Of Pressure Change:RoHS; Sequence Valve:Oil-Impregnated Expanded Cast Iron; Maximum rotational speed:30B; Maximum Axial Force At Standstill:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Load Pressure:Lead Free; Weight (approx.):Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |
| CONSOLIDATED BEARING FT-5 Thrust Ball Bearing | Maximum Torque:14 mm; Weight (approx.):10 N/mm2; Moment of inertia rotary group:16 mm; Case volume:Periodic lubrication 1.00;Oil lubrication 3.35 m/s; Control Pressure Measurement:10 mm; Maximum Volume Flow:300 Cast Iron; Control Fluid Drain:Plain Sleeve; Drive Power:RoHS; Maximum rotational speed:Oil-Impregnated Expanded Cast Iron; Maximum Permissible Speed (limit Speed):30B; Torque:Periodic lubrication -40 to +212, Oil lubrication -40 to +302 °FPeriodic lubrication -40 to +212 Oil; Determining Operating Characteristics:Lead Free; Sequence Valve:Periodic lubrication 1.25, Oil lubrication 3.25 N/mm2 x m/s; |